Behringer PMP1000 12-Channel Powered Mixer (500 Watts)
The PMP1000 powered mixer delivers more power, better sound at less weight!

Behringer PMP1280S Europower Powered Mixer (1200 Watts)
The PMP1280S mixer delivers 1,200 Watts of massive power and incredible performance through new-generation amplifier technology, crystal-clear sound plus an ultra-compact and lightweight design.

Behringer PMP2000 10-Channel Powered Mixer (800 Watts)
The PMP2000 powered mixer delivers more power, better sound at less weight!

Behringer PMP3000 16-Channel Powered Mixer (1200 Watts)
The PMP3000 powered mixer delivers more power, better sound at less weight!

Behringer PMP5000 20-Channel Powered Mixer (1200 Watts)
The PMP5000 powered mixer delivers more power, better sound at less weight!

Behringer PMP518M 5-Channel Powered Mixer (180 Watts)
The PMP518M powered mixer delivers more power, better sound at less weight!

Behringer PMH2000 Europower 10-Channel Powered Mixer with FX (2x250 Watts)
Behringer proudly introduces a first: a compact power mixer with everything you need to get your sound to your audience - just plug in your instruments and microphones, add a pair of speakers and you're ready to go. The PMX2000 gives you 6 mono channels with ULN mic/line preamps with peak LEDs, a -25 dB pad and switchable phantom power, the renowned super-musical 3-band EQ, an internal effects send, and a monitor send.

Behringer PMH880S 10-Channel Powered Mixer with FX (800 Watts)
The PMH880S is our top-of-the-line box-type powered mixer. It features 10 channels (6 mono + 2 stereo) plus stereo tape returns, giving you the capacity to handle small bands or events with several microphones plus various playback devices. Its 2 x 400-Watt (800 Watts bridged mode) CoolAudio amplifier delivers massive power and flexibility for a wide variety of house and monitor speaker configurations.

Mackie 406M Powered Mixer (Mono, 500 Watts)
This mixer is designed to run all night into brutally low impedances and sound clean even when driven hard. Mackie starts with a massive toroid transformer and 2 unusually large storage capacitors with 720 joules of energy storage capacity. In fact, the PPM power supply is so robust that it can run on as little as 80 volts at the end of a long, skinny extension cord during a brown-out. Then they add their Fast Recovery circuitry that reduces latching distortion so PPM Series mixers sound good even when driven well into clipping. Also included is an SCR crowbar circuit for speaker protection.

Mackie 808M Powered Mixer (Mono)
This mixer is designed to run all night into brutally low impedances and sound clean even when driven hard. Mackie starts with a massive toroid transformer and 2 unusually large storage capacitors with 720 joules of energy storage capacity. In fact, the PPM power supply is so robust that it can run on as little as 80 volts at the end of a long, skinny extension cord during a brown-out. Then they add their Fast Recovery circuitry that reduces latching distortion so PPM Series mixers sound good even when driven well into clipping. Also included is an SCR crowbar circuit for speaker protection.

Mackie 808S Powered Mixer (Stereo, 1200 Watts)
This mixer is designed to run all night into brutally low impedances and to sound clean even when driven hard.

Peavey PVI4B Powered Mixer
PVi Powered Mixers are easy to use and transport, and are designed with exclusive Peavey techonology!

Peavey PVI8B Powered Mixer
PVi Powered Mixers are easy to use and transport, and are designed with exclusive Peavey techonology!

Peavey XR8300 Powered Mixer
They feature new improved low noise mic preamps, multi point clip sampling and a new subsonic filter to prevent low frequency power robbing. New graphic equalizers have multi-Q bandwidth to allow some filters to perform feedback control while others perform tone control and have Peavey's patented FLS (Feedback Locating System).

Peavey XR8600 Powered Mixer
They feature new improved low noise mic preamps, multi point clip sampling and a new subsonic filter to prevent low frequency power robbing. New graphic equalizers have multi-Q bandwidth to allow some filters to perform feedback control while others perform tone control and have Peavey's patented FLS (Feedback Locating System).

Phonic PowerPod 408 4-Channel Powered Mixer
The PowerPod 408 features 4 mono input channels, each with XLR microphone and 1/4 in. line level input connectors and super musical 2-band EQ. Built-in, fully adjustable digital delay gives you a professional sound quality that's a significant upgrade from the reverb often found in powered mixers. The power amp delivers 80 watts (at 4 ohms, 120W peak) to your speakers. That's a generous amount of power for rehearsal rooms and smaller gigs. Other features include RCA Tape in/out, a rugged wooden case and durable carpet covering.

Phonic PowerPod 620 6-Channel Mixer
The Phonic Powerpod Series are powered mixers in a compact and durable design. Each Powerpod mixer has multiple Mic/Line input channels and a built-in amplifier. The 2-band EQ on every channel gives you maximum control over your mix. The Powerpod 620 is equipped with built-in variable digital delay. Extra features of the Powerpod 620 are onboard 24-bit digital effects processor, 7-band graphic EQ and Super Hi-Z inputs for the addition of guitars and other instruments.

Samson TXM16 16-Channel Powered Mixer (500 Watts)
The TXM16 is a 16-channel powered mixer, with selectable power amp mode settings for 500 watts of power per channel, or 1000 watts in bridged mono. It features 8 high-quality microphone preamps with phantom power, channel inserts and low cut filters. 1/4 in. phone and Speakon outputs. 3-band EQ pre channel, 3 Aux sends, and an internal 24-bit effects processor with 100 preset programs.

Samson TXM20 20-Channel Powered Mixer (500 Watts)
The TXM20 is a 20 channel powered mixer, with selectable power amp mode settings for 500 watts of power per channel, or 1000 watts in bridged mono. It features 12 high-quality microphone preamps with phantom power, channel inserts and low cut filters. 1/4 in. phone and Speakon outputs. 3-band EQ pre channel, 4 Aux sends, and dual internal 24 bit effects processor with 100 preset programs.

Samson XM410 6-Channel Powered Mixer (400 Watts)
The XM410 is the latest in Samson's new line of powered mixers. Compact, light-weight and powerful, it has 6 mic/line inputs with 1/4 in. and XLR connections. It features low noise mic pre-amps with phantom power, 24-bit digital effects with 100 selectable presets of reverb, delay, and chorus. Three band equalization is available on each channel as well as effects and monitor sends. Seven-band graphic equalization is available on the main output section.

Samson XM910 8-Channel Powered Mixer (900 Watts)
Samson's XM910, combining mixer, effects, equalization and amplifier power into a compact and portable, yet extremely powerful system, perfect for any gig big or small.

Soundcraft GigRac 600 Powered Mixer (2x300 Watts)
Now there's a really easy way to make great live sound, thanks to Soundcraft's new integrated mixer/amplifier GigRac. Whether you're a solo performer or a in small band, you'll appreciate not only GigRac's cool, stylish looks, but also its portability, and the ease with which you can connect your microphones, instruments and loudspeakers to deliver a punchy performance every time. GigRac comes from Soundcraft, the name behind the live sound mixing consoles used on many of the world's major tours and festivals, so you can be sure that the sound quality is going to be absolutely staggering.

Soundcraft GigRac 1000ST Powered Mixer (2x500 Watts)
The GigRac family of powered mixers for gigging bands and presentation systems has been joined by the most powerful version yet -- the stereo GigRac 1000st, which delivers a massive 1000 watts output power (500 watts per channel into 4 ohms).

Yamaha EMX212SC Powered Mixer with Effects (200 Watts)
The lowest-powered model in the series offers a pair of 200-watt amplifiers per channel that should be more than sufficient for small-to-medium size venues.

Yamaha EMX312SC Powered Mixer with Effects (300 Watts)
With the power for mid-to-large venues - 300 watts + 300 watts - and the added advantage of one-knob compression on mono channels, the EMX312SC may be the model you need.

Yamaha EMX5014C Powered Mixer
Like others in the EMX family, the EMX5014C is a fully integrated mixer offering a range of features to mix, process, and deliver your sound with maximum quality and creative control. Equipped with ultra lightweight amplifier circuits, power is the priority of the 500-watt per channel multi-mode stereo power section.

Yamaha EMX5016CF Powered Mixer (2x500 Watts)
The Yamaha EMX5016CF delivers the convenience of an integrated powered mixer with input capacity, flexible features, and solid sound that critical live applications demand. It is remarkably compact and portable for a live sound system with this much capability. And thanks to leading Yamaha digital technology, the EMX5016CF also includes a number of innovations that make it easier than ever to achieve top-class sound in just about any venue. An impressive power output of 500 watts per channel means it can handle fairly large audiences, indoors or out. The EMX5016CF goes considerably beyond the standard definition of "powered mixer," entering the realm of serious sound reinforcement.

Yamaha EMX512SC Powered Mixer with Effects (500 Watts)
For larger venues and audiences, or if you plan to use it for outdoor sound, the EMX512SC with a pair of whopping 500-watt amplifiers to ensure that your music or message comes across with full impact.